Gemeinsam mit unserem Finanzierungspartner TARGOBANK ermöglichen wir dir eine bequeme Finanzierung in monatlichen Raten – für Warenkörbe ab 99,00 €.
| Laufzeit | Effektiver Jahreszins |
|---|---|
| 6–12 Monate | 5,90 % |
| 15–21 Monate | 6,90 % |
| 24–30 Monate | 7,90 % |
| 33–36 Monate | 8,90 % |
Nur innerhalb Deutschlands verfügbar. Finanzierung ab 99,00 € Warenkorbwert und vorbehaltlich der Prüfung durch die TARGOBANK.
Wähle an der Kasse einfach die Zahlungsart TARGOBANK Finanzierung und folge den weiteren Schritten. Nach Abschluss deiner Bestellung gelangst du zum Finanzierungsantrag der TARGOBANK.
Die Finanzierung erfolgt vorbehaltlich der Prüfung und Genehmigung durch die TARGOBANK. Die Angaben sind unverbindlich; maßgeblich sind die Konditionen im individuellen Finanzierungsangebot. Eine monatliche Mindestrate kann gelten.
Couple
The ATX® Footrests for Lat Pulldown Stations are the ideal accessory for ATX® Power Racks of the 600 and 700 series. They are simply attached to the designated holes or slots of the rack and provide optimal foot support during lat pulldowns, rows, and other pulling exercises – for safe, effective training without slipping. The odorless rubber footrests are robust, durable, and retrofittable: The center distance of the mounting holes is 15 cm, the distance from the stop edge of the profile tube to the center of the hole is 3 cm – so you can easily measure in advance whether your existing rack is compatible.
Delivery is in pairs, including 4 pieces of M12 x 100 mm mounting screws.
1 x ATX® Footrests for Lat Pulldown Stations (Pair)
Item number: MS-ATX-RUB-FTRT
The center distance between the mounting holes of the ATX® foot supports for lat pull-down stations is 15 cm. The distance from the edge of the profile tube to the center of the first hole is 3 cm.
The ATX® foot supports for lat pull-down stations are not compatible with the ATX® Rack pull-down station including multi-press for wall mounting.
The station lacks the required lower cross-brace with the designated mounting holes. Proper installation of the foot supports is therefore not possible.
For safety reasons, we strongly advise against individual drilling or structural modifications to the frame, as these can compromise stability, load capacity, and warranty.
The ATX® foot rests are specifically designed for ATX® Power Racks of the 600 and 700 series. We cannot generally confirm installation on racks or lat pull stations from other manufacturers.
The following dimensions are decisive for compatibility:
Hole center spacing: 150 mm
Distance from the stop edge of the profile tube to the first hole center: 30 mm
Fastening: 4 screws M12 × 100 mm, included in delivery
Additionally, a suitable, sufficiently stable cross-member with corresponding mounting holes must be present.
Du bist unsicher, welches Produkt zu deinem Trainingsziel passt? Kein Problem! Unser erfahrenes Team nimmt sich Zeit für dich – telefonisch (08142/ 448666), per E-Mail oder direkt im Showroom. Gemeinsam finden wir die optimale Lösung für dein Vorhaben.
